Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for North Las Vegas Homeowners
Real hardwood takes a beating in a desert valley. Sun pours through west-facing windows most of the year, indoor humidity swings between the monsoon months and the dry spring, and grit tracked in from a gravel yard acts like sandpaper under every chair leg. The result is a floor that looks tired long before the wood itself is worn out. That’s where refinishing earns its keep: sanding back the damaged surface and building a new finish on top lets you keep the floor you already have instead of tearing it out. Our technicians have up to 8 years of experience with sanding, staining, and recoating, and we service the brands most North Las Vegas homes already have underfoot. Call (844) 761-9160 and we’ll talk through what your floor needs.
What Our Hardwood Floor Refinishing Service Includes
Refinishing isn’t one job, it’s a family of jobs. The right one for your floor depends on how deep the damage goes and how much wood is left to work with. Here’s how we break it down.
Hardwood Floor Sanding
Sanding is the foundation of any full refinish. It removes the old finish and a thin layer of the wood surface to expose clean, fresh grain that will take a new stain and topcoat evenly. You need it when the existing finish is worn through in traffic lanes, when the floor has deep scratches or dents, or when a previous finish is peeling and flaking. We sand in stages with progressively finer grits so the surface comes out flat and even, and we check the wood’s thickness before we start because not every floor has enough left to sand safely.

Hardwood Floor Staining
Staining is what changes the color of the floor, not just its sheen. It’s the step where you can go warmer, darker, or shift a dated orange-toned oak toward something more neutral to match the rest of the house. You want staining when the floor’s color is uneven, when sun damage has faded one room and not another, or when you’re updating the look of a whole level. We apply stain in controlled passes and check the tone against the room’s lighting before sealing, and we’re honest that a stain can’t always match a sample exactly because every board takes stain a little differently.

Hardwood Floor Restoration
Restoration covers the floors that need more than a cosmetic pass. That means repairing loose or cupped boards, addressing gaps, replacing damaged sections with matching wood, and then refinishing the whole floor so the repairs disappear into the field. You need restoration when there’s water damage, pet damage, or a section that’s been patched badly in the past. We assess the whole floor at the estimate visit, tell you what’s repairable and what isn’t, and quote the work as one job so you’re not guessing at the total.

Hardwood Floor Buffing
Buffing is a light refresh for a floor whose finish is dull but still intact. It scuffs the top layer of the existing finish and applies a new coat, which brings back shine without removing any wood. You want buffing when the floor looks flat and lifeless but doesn’t have deep scratches or worn-through spots. It’s the least invasive option we offer, and it’s a good fit when the wood is thin or when the current finish is still sound enough to build on.
Screen and Recoat Hardwood Floors
A screen and recoat sits between buffing and a full sand: we abrade the surface with a screen and lay down a fresh coat of finish, all without staining or cutting into the wood. You need it when the finish is starting to wear in high-traffic areas but the color and the wood underneath are still in good shape. It’s the maintenance step that buys years before a full refinish is necessary, and we’ll tell you honestly if your floor is past the point where it will hold.
Stair Refinishing
Stairs take more abuse than any flat floor in the house, and they’re usually the first thing to show it. Treads wear through, nosings get chipped, and the color goes patchy where feet land. You need stair refinishing when the steps no longer match the floor below, or when a refinish on the main level would leave the staircase looking dated by comparison. We refinish treads, risers, and railings as part of the same job so the finished staircase reads as one continuous piece with the floor.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
Refinishing is about the wood and the finish on it, not the label on the box, but the brand still tells us something about how a floor was built and how it will respond to sanding. We work on hardwood from Shaw and Mohawk, two of the most common names in North Las Vegas homes, and we’ve learned where their finishes tend to wear and how much wood their boards typically give you to work with. We also refinish floors installed alongside COREtec and Pergo projects, where a homeowner has hard surface in the kitchen and wood in the living areas and wants the whole house to feel consistent.
If your floor was installed by a previous owner and you don’t know what’s under the finish, that’s normal. We identify the wood species and check the thickness at the estimate visit, and we’ll tell you whether it’s a good candidate for sanding or whether a screen and recoat is the safer call. Whether you have Shaw, Mohawk, or any other make, we can help. What matters is the condition of the wood, and that’s what we look at first.
Signs You Need Hardwood Floor Refinishing Right Now
- Worn traffic lanes: The finish has rubbed away in the paths between rooms, leaving dull, grayish strips where the bare wood is showing. Once the finish is gone, the wood underneath takes on moisture and dirt directly, and small problems grow into sanding jobs.
- Deep scratches and gouges: You can feel the damage with a fingernail, not just see it. Scratches that catch mean the finish is breached, and refinishing is the only way to level them out rather than hide them.
- Gray or faded patches: Sun exposure through a west window bleaches wood over time, and the faded area rarely matches the shaded part of the room. A refinish evens the color back out so the whole floor reads as one surface.
- Peeling or flaking finish: The topcoat is lifting in sheets or flaking off in small chips, usually near exterior doors or in kitchens. A failing finish lets moisture into the wood, and a screen and recoat while it’s still early can save you a full sand later.
- Cupped or uneven boards: Edges of individual boards feel raised or dip below their neighbors when you run a hand across them. That’s a moisture problem showing at the surface, and it needs to be looked at before any sanding happens.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
In-home assessment and moisture check. We look at the wood species, the thickness of the wear layer, and the condition of the finish, and we check moisture levels in the floor and the room. This is where we tell you whether refinishing is worth it or whether the floor is better off replaced.
- 2
Written estimate and schedule. You get a written price that spells out the scope: sanding, staining, repairs, number of coats, stairs. The estimate is free and there’s no obligation, and the written price is what sets the final cost.
- 3
Preparation and repair. We pull the room clear, protect the surrounding surfaces, and handle any board replacement or gap work before sanding starts. Repairs get done first so the finished floor is consistent from wall to wall.
- 4
Sanding and staining. We sand in stages with progressively finer grits, vacuum between passes, and check the surface with raking light so nothing gets missed. Stain goes on in controlled passes, and we verify the tone against the room’s lighting before sealing.
- 5
Finish coats and final walkthrough. We apply the topcoat, let it cure per the product instructions, and walk the floor with you at the end. You’ll know exactly what to expect for care in the first weeks, and you’ll see the finished result before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in North Las Vegas?
Typical hardwood floor refinishing in North Las Vegas runs $1675 to $4650 for a 500 to 800 square foot project, and that range holds whether you’re doing a full sand and stain or a lighter screen and recoat on part of the house. Hardwood refinishing starts from about $3 per square foot, but the price per square foot depends on the product, the room, and the subfloor, and the written estimate sets it. A screen and recoat with stairs usually lands near the middle of that range, while a full restoration with board replacement tends to sit at the top.
What moves the price: the square footage, how many coats the finish needs, whether there’s stain involved, how much repair work the floor needs, and whether stairs are part of the job. Buffing is the least expensive option and full restoration is the most, because each step adds labor and material. To avoid overpaying, get a written scope rather than a per-square-foot number over the phone, and ask whether repairs and stairs are included or added separately. Our free estimate covers the assessment, the moisture check, and a written price for the full job, so you can compare apples to apples before you commit. Call (844) 761-9160 to schedule yours.
Hardwood Floor Refinishing Near North Las Vegas – Our Service Area
We refinish hardwood across North Las Vegas and the surrounding valley, including Moapa Town, Sunrise Manor, and the neighborhoods between them. If you’re in Las Vegas, Winchester, Whitney, Paradise, Spring Valley, Summerlin, Henderson, Enterprise, or Boulder City, we cover those too. Response times depend on where you are and how booked the schedule is, and we’ll tell you honestly what’s realistic when you call. Start with our flooring North Las Vegas page if you want to see the full picture of what we do, or go straight to the North Las Vegas page for neighborhood-level detail.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in North Las Vegas
Hardwood floor refinishing is the process of sanding away the old finish and a thin layer of the wood surface, then applying new stain and topcoat to restore the floor’s appearance. It’s different from replacement because you keep the original wood and only renew the surface. It’s also different from a screen and recoat, which refreshes the existing finish without cutting into the wood. We’ll tell you at the estimate which method your floor actually needs.
Most refinishing jobs take several days from start to finish, and the schedule is set at the estimate. The timeline depends on the square footage, the number of coats, how long the finish needs to cure, and whether repairs or stairs are involved. Products vary in cure time, so the product instructions and your written estimate set the exact timeline for your floor. Call (844) 761-9160 and we’ll walk you through what your job looks like.
Typical hardwood floor refinishing in North Las Vegas runs $1675 to $4650 for a 500 to 800 square foot project, with per-square-foot pricing starting from about $3. The exact number depends on the square footage, the scope of repairs, staining, stairs, and the type of finish. The written estimate sets the final price, and it’s free. Call (844) 761-9160 for an exact quote.
Yes, we refinish Shaw and Mohawk hardwood along with most other makes and species. The brand tells us how the floor was built, but the deciding factor is the condition of the wood and how much thickness is left to sand. We check both at the estimate visit. Call (844) 761-9160 to schedule a free assessment.
Refinishing is a scheduled job rather than a same-day repair, so the work gets booked after the estimate and the install day is set in advance. Our phone line is answered around the clock: We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (844) 761-9160 and we’ll find the next opening that works for you.
Warranty coverage depends on the products and the scope of the job, and we spell it out in the written estimate so you know what’s covered before work starts. Product instructions also set care requirements, and following them is part of keeping the finish sound. Ask about warranty specifics when you get your estimate, and we’ll tell you exactly what applies. Call (844) 761-9160 for details.
Clear the room of furniture and belongings before the crew arrives, and plan for the floor to be out of use while the finish cures. Remove wall hangings near the floor, and keep pets and foot traffic off the area until we tell you it’s ready. The estimate visit covers exactly what needs to move and what we handle. Call (844) 761-9160 and we’ll give you a checklist.
Schedule Your Hardwood Floor Refinishing Service in North Las Vegas Today
If your hardwood is worn, faded, or just past its prime, a refinish can bring it back without the cost and disruption of a full replacement. Estimates are free, quotes are written, and we’ll tell you honestly whether refinishing is the right call for your floor. Call (844) 761-9160. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Let’s get your North Las Vegas floor back to the way it looked when it was new.
Written by the team at Flooring North Las Vegas.